It’s 5 a.m., the first big storm has dropped 15 cm, and your phone is already buzzing. A tenant can’t get into the lot, and someone has asked whether the sidewalks are clear. You need answers, and your contractor needs clear instructions to give them.

Most winter problems on commercial sites come from unclear expectations, not bad plowing. If you prepare your site before the first storm and set up a simple communication routine, you’ll cut complaints, shorten response times and protect yourself from liability. Here’s how.

Start Before the First Flake

The best time to prepare is early fall, while the ground is bare and the schedule is quiet. Walk the property with your contractor and look at it the way a plow operator will. You’ll spot hazards that are invisible once snow covers them.

Your Pre-Season Checklist

  1. Review your contract. Confirm the snowfall trigger depth (the amount that sends crews out), the response time, and any seasonal cap. A common benchmark in Ottawa is a 254 cm seasonal snow cap.
  2. Mark the hazards. Flag curbs, bollards, catch basins, irrigation heads, lamp bases and uneven pavement.
  3. Choose snow storage areas. Piles shouldn’t block sightlines, fire hydrants, drains or accessible parking.
  4. Identify priority zones. Entrances, accessible stalls, fire routes and loading docks should get cleared first.
  5. Confirm insurance. Ask for a current certificate of insurance and check that it covers your site.

Know What You’re Responsible For

Hiring a contractor doesn’t hand off every duty. In Ontario, property owners and occupiers must take reasonable care to keep people safe, and that legal responsibility stays with you. Your contract should spell out who does what, but you still need to confirm the work happens.

Documentation protects you. If someone slips and files a claim, dated records of plowing, salting and inspections show that you acted reasonably. Ask for them from day one.

How to Communicate With Your Snow Contractor

Name One Point of Contact on Each Side

Give your contractor a single person to call, with a backup. Ask for the same in return. When five tenants phone five different people during a storm, instructions get lost.

Share Your Calendar

Your contractor can’t plan around events they don’t know about. Tell them about weekend markets, grand openings, deliveries, construction and special tenant hours. For example, a plaza with a Friday-night restaurant rush may need the lot cleared by 3 p.m. instead of the usual morning window.

Medical offices, daycares and seniors’ residences have extra needs. Share when accessible entrances and drop-off zones must be ready.

Give Feedback Fast and Specifically

“The lot looks bad” doesn’t help anyone. “The northeast corner by the pharmacy has ice at 7:30 a.m., photo attached” does. Send the location, the time and a photo, and you’ll get a faster fix.

Praise matters too. If a crew nails a tricky storm, tell them. It builds goodwill for the next 2 a.m. call.

What to Ask For After Every Storm

Don’t wait for a problem to request records. Set expectations early so reports arrive automatically. A good service report includes:

  • Date, arrival and departure times for each visit
  • Services performed, such as plowing, sidewalk clearing and salting
  • Weather conditions and snowfall amounts
  • Photos of the finished work, especially entrances and walkways
  • Any hazards or damage noted on site

You can read more about how a full service works on our snow and ice control page.

Watch the Thaw, Not Just the Snowfall

Some of the worst slip hazards show up after the storm. During Ottawa’s freeze-thaw cycles, meltwater runs off snow piles, crosses the walkway and refreezes overnight. Ask your contractor how they handle this, and whether they’ll check your site after temperatures drop.

Also watch roofs and eaves. Ice and snow sliding off a building can hit people or cars near entrances. Tell your contractor if your building has problem spots.

Frequently Asked Questions

How often should I meet with my snow contractor?

Meet once before the season and once mid-winter. Add a quick debrief after any major storm or complaint.

What’s a snowfall trigger?

It’s the snow depth that tells your contractor to start plowing. Contracts commonly set it at a few centimetres, but your agreement defines the exact number.

Should I salt before a storm?

Often, yes. Applying salt ahead of freezing conditions can help prevent ice from bonding to pavement. Ask your contractor which approach they plan to use for your site.

What if I’m not happy with the service?

Document the problem with photos and timestamps, send them to your contact right away, and ask for a response in writing. A clear record makes resolution faster.

Read More

Jerome Bass

Jerome leads Business Development at VS Landscape Group, combining strategic thinking with hands-on industry knowledge. He focuses on growing the brand through relationship-building, targeted outreach, and a commitment to delivering exceptional service. With a background in marketing and sales, Jerome is passionate about creating long-term value for clients and partners. His creativity and positive mindset drive helps us succeed in turning opportunities into results.